DC Standards / Division 22 - Plumbing

The University of Texas at Austin Design and Construction Standards have been prepared by the University to guide and assist architects, engineers, other design professionals, contractors, and university staff (herein referred to as Professional) in understanding the preferences of The University of Texas at Austin in the development, maintenance, repair and replacement of its facilities and assets.

If you wish to download multiple files, you may do so by going to the Current PMCS Design and Construction Standards UT Box Folder.

Division 22 - Design Criteria

File Link Word File Link File Title Updates Made Rev. Date
Div22_PL_DC (PDF) Div22_PL_DC (DOC) Plumbing Design Criteria Update 08/2021
Div22_DWS_DC (PDF) Div22_DWS_DC (DOC) Domestic Water Systems Design Criteria Update 03/2017
Div22_NGS_DC (PDF) Div22_NGS_DC (DOC) Natural Gas Systems Design Criteria Update 03/2017
Div22_WRS_DC (PDF) Div22_WRS_DC (DOC) Water Recovery Systems Design Criteria Update 03/2017

Division 22 - Technical Specifications

File Link Word File Link File Title Updates Made Rev. Date
22.00.00 (PDF) 22.00.00 (DOC) Basic Plumbing Requirements Update 03/2017
22.05.00 (PDF)   Common Work Results for Plumbing None 04/2012
22.05.13 (PDF) 22.05.13 (DOC) Common Motor Requirements for Plumbing Equipment  Update 01/2021
22.05.23 (PDF) 22.05.23 (DOC) General Valves for Plumbing Piping Update 06/2017
22.05.29 (PDF) 22.05.29 (DOC) Hangers and Supports Update 06/2020
22.05.33 (PDF) 22.05.33 (DOC) Heat Tracing for Plumbing Piping Update 10/2020
22.05.48 (PDF) 22.05.48 (DOC) Vibration Isolation for Plumbing Update 04/2021
22.05.53 (PDF) 22.05.53 (DOC) Plumbing Identification Update 04/2017
22.07.19 (PDF) 22.07.19 (DOC) Plumbing Piping Insulation Update 11/2018
22.10.17 (PDF) 22.10.17 (DOC) Natural Gas Piping and Appurtenances Update 03/2017
22.10.23 (PDF) 22.10.23 (DOC) Plumbing Pumps Update 04/2017
22.11.00 (PDF) 22.11.00 (DOC) Facility Water Distribution Update 06/2020
22.13.00 (PDF) 22.13.00 (DOC) Facility Sanitary Sewerage Update 06/2020
22.13.19 (PDF) 22.13.19 (DOC) Plumbing Specialties Update 09/2019
22.14.00 (PDF) 22.14.00 (DOC) Facility Storm Drainage Update 11/2018
22.20.00 (PDF) 22.20.00 (DOC) Water Recovery Update 04/2017
22.30.00 (PDF) 22.30.00 (DOC) Plumbing Equipment Update 03/2017
22.40.00 (PDF) 22.40.00 (DOC) Plumbing Fixtures Update 03/2017
22.61.19 (PDF) 22.61.19 (DOC) Compressed Air Systems Update 05/2019
22.62.19 (PDF) 22.62.19 (DOC) Laboratory Vacuum Systems Update 01/2021
22.63.13 (PDF) 22.63.13 (DOC) Medical Gas Systems Update 04/2021
22.63.19 (PDF) 22.63.19 (DOC) Lab Gas Systems Update 04/2019
22.66.00 (PDF) 22.66.00 (DOC) Lab Waste Systems Update 02/2019
22.67.13 (PDF) 22.67.13 (DOC) Laboratory and Deionized Water Systems Update 02/2019

Division 22 - Supplemental Standards 

File Title and Link Updates Made Rev. Date
Pipe Testing Procedure None 09/2012
Energy and Water Performance Information Request (PDF) (DOC) None 12/2019
Commissioning Scope of Services and Deliverables (PDF) (XLS) None 04/2017
EHS Pretreatment Device Compliance Procedure None 07/2019
Design & Construction Standard Detail Drawings None 04/2017
Non-Routine Discharge Guidance None 04/2017
Food Establishment Guidelines Update 09/2019
Standard Operating Procedure for Dye Testing Update 07/2021

Detail Drawings

All Standard Detail Drawings presented herein are intended to assist architects, engineers, other design professionals, contractors and UT staff in understanding the preferences of The University of Texas at Austin in the development, maintenance, construction and repair of its facilities. These Detail Drawings are intended to be used as guidelines. Detail Drawing documents require modification to meet the conditions and appurtenances of each project; therefore the legal responsibility for project document preparation shall continue to reside with the Design Professional. Refer to the Welcome Page for additional requirements. The Detail Drawings were created in AutoCAD 2007 file format; AutoCAD is a registered trademark of Autodesk Inc.

Important: These Detail Drawing documents are for use by The University of Texas at Austin and its consultants and contractors. Drawings remain the property of The University of Texas at Austin at all times.

Viewing Note: The CAD (DWG) files will not open in a browser, you have to save them to the your desktop.

Division 22: Detail Drawings

Section Title CAD Files PDF
P-22-1-3 FLOOR DRAIN INSTALLATION DETAIL P-22-1-3 P-22-1-3
P-22-1-4 FLOOR DRAIN INSTALLATION DETAIL P-22-1-4 P-22-1-4
P-22-1-12 FLOOR DRAIN INSTALLATION DETAIL P-22-1-12 P-22-1-12
P-22-1-13 FLOOR DRAIN INSTALLATION DETAIL P-22-1-13 P-22-1-13
P-22-2-2 PIPE SUPPORT DETAIL P-22-2-2 P-22-2-2
P-22-2-5 PIPE SUPPORT DETAIL P-22-2-5 P-22-2-5
P-22-2-6 MODULAR COMPRESSION PIPE SEAL AND SLEEVE DETAIL P-22-2-6 P-22-2-6
P-22-2-7 PIPE SLEEVE DETAILS P-22-2-7 P-22-2-7
P-22-2-8 WATER, WASTE & VENT PIPING HANGERS & SUPPORTS DETAIL P-22-2-8 P-22-2-8
P-22-5-1 LAVATORY & SINK CONNECTION DETAIL P-22-5-1 P-22-5-1
P-22-5-5 LAVATORY & SINK CONNECTION DETAIL P-22-5-5 P-22-5-5
P-22-5-6 DETAIL: LAB SINK CONNECTION P-22-5-6 P-22-5-6